NEW GENUINE DYSON PARTS &
ACCESSORIES
ABOUT US
|
Dyson DC04 - Belts & Filters
|
Dyson DCO4 - Belts & Filters
|
Dyson DC04 Lifetime Filter
Lifetime filter. No compromise on suction power or filtration efficiency. Filters particles as small as cigarette smoke (0.1 micron). Washable.
£
Stock :
|
 |
Dyson DC04 Post Filter Pad
Replace every 12 months, Located under bin Please check image to match against you existing filter
Please check image against your current post filter, you will either require the post filter pad, the H Level Post Filter or the Hepa Filter as listed below depending on your type
£
Stock :
|
|
Dyson DC04 H level post filter
Replace every 12 months, Located under bin
Please check image to match against you existing filter
Please check image against your current post filter, you will either require the post filter pad, the H-Level Post Filter or the Hepa Filter as listed depending on your type
£
Stock :
|
|
Dyson DC04 HEPA Post Filter
Located under bin
Please check image to match against you existing filter
Please check image against your current post filter, you will either require the post filter pad, the H-Level post filter or the Hepa Filter as listed depending on your type
£
Stock :
|
|
Dyson DC04 Post Filter Lid Seal
£
Stock :
|
|
Dyson DC04 Belt Twin Pack
Specially developed rubber compound for increased belt life. Pack contains two belts and fitting instructions. Only suitable for models Silver/Lime + DC04i + Constant Max Belt number 00527-01
£
Stock :
|
|
Dyson DC04 Motor to Clutch Belt
Only Suitable for models with brush control Please note - if you require the clutch to brush roll belt, you need to purchase the complete clutch assembly - listed bellow
£
Stock :
|
|
Dyson DC04 Clutch Assembly
Includes both belts. Fits all DC04 Brush Control Models
This part DOES NOT FIT Models DC04 S/Lime, DC04 Constant Max, DC04i & DC04 Zorb
£
Stock :
|
|
Dyson DC04 Zorbster Clutch Assembly
Includes both belts. For DC04 Zorb model only
£
Stock :
|
|
Belt Tool
For assisting on fitting brush control brushbars & clutch assemblies
Not available for purchase. This tool is for hire only, deposit will be refunded on return of tool.
This tool is only available for hire within the UK
Belt fitting tool - Hire Charge £5.50
Refundable deposit on return £20.00
|
|
Torx 10 Screwdriver
For access to replacing clutch belts Blade length 80mm
£
Stock :
|
|
Torx 15 Screwdriver
For access to Motor, Clutch, Cable assemblies Blade length 80mm
£
Stock :
|
|