DYSON PARTS &
ACCESSORIES
About Us
|
Dyson DC05 - Replacement Parts
|
DCO5 Other Products
|
Torx 15 Screwdriver
For access to Motor, Cable assemblies
Blade length 80mm
Torx 15 £8.50
|
|
Bin assembly
Tough polycarbonate construction. Includes bin-inner and fitted seals.
Please note that if you have an early version DC05 you may also require a filter cover.
DC05 Bin assembly £20.00
|
|
Extension Tube
Made of aluminuim, now more lightweight than previous steel wands.
Please note this extension tube does not fit the DC05 Motorhead.
DC05 Extension Tube £29.50
|
|
Extension Tube - Lavender for DC05 Motorhead
Made of lightweight aluminium. Telescopes up to the length that you want.
Only suitable for DC05 Motorhead Model
DC05 Extension Tube - Motorhead Model £35.00
|
|
Extension Rod Catch
Fits the bottom part of the extension rod.
Please ensure before ordering that the lugs on the rod are intact so that the new catch will hold in place.
You may also require the spring as listed bellow.
DC05 Extension Rod Catch £1.75
|
|
Extension Rod Catch Spring
Fits the bottom part of the extension rod.
DC05 Extension Rod Catch Spring £0.95
|
|
Hose
Includes hose cuffs.
Please note this hose does not fit the DC05 Motorhead
DC05 Hose £20.00
|
|
Hose & Wand For DC05 Motorhead
Includes hose, electrical connections, wand handle and integral tool holster.
Only suitable for DC05 Motorhead Model
Hose & Wand - Motorhead Model £53.00
|
|
Turbo Brush
Rotating brushbar powered by constant airflow. Improves pick-up of pet hairs and other fibres. Ideal for use on large areas of carpet.
Please note this turbo brush fits most DC05 colour variants but does not fit the DC05 Motorhead.
DC05 Turbo Brush £35.00
|
|
Motorhead Floor Tool
Motorised brushbar for higher dust and fibre pick-up. With centrally-positioned motor to minimise weight.
Only suitable for DC05 Motorhead Model
Motorhead Floor Tool - Motorhead Model £40.00
|
|
Brush Roll - Motorhead Floor Tool
Replacement brush roll which will fit into your existing motorhead floor tool
Only suitable for DC05 Motorhead Model
Brush Roll £15.00
|
|
Wand handle
ABS plastic. Includes suction release trigger and 360 degree swivel joint.
Please note this wand does not fit the DC05 Motorhead,
DC05 Wand handle £19.00
|
 |
Bumper Strip
Please note this part is now only available in grey to suit all the dc05 range
DC05 Bumper Strip £5.99
|
|
Cyclone Top Cover
DC05 Cyclone Top Cover £18.00
|
|
Replacement Cable Reel Assembly
Replacement of mains cable must only be fitted by a suitably trained person.
Fitting instructions not included.
DC05 Cable Reel Assembly £23.00
|
|
Pedal Cover
Cable rewind cover
DC05 Cable rewind Pedal Cover £3.50
|
|
Motor - TYPE YDK YV2100-1
Please note there are two types of motor for the DC05. Please contact us before placing your order to ensure you order the correct type.
Replacement of motors must only be fitted by a suitably trained person.
Motors are non refundable
DC05 YDK Motor £37.75
|
|
Motor - TYPE PANASONIC - SDS1204SD
Please note there are two types of motor for the DC05. Please contact us before placing your order to ensure you order the correct type.
Replacement of motors must only be fitted by a suitably trained person.
Motors are non refundable
DC05 Panasonic Motor £37.75
|
|
